Record Player DELUXE Setup Tool Kit – Vinyl Lovers Gift Bundle Pack

Description

DELUXE Setup Tool Kit for turntable and record player. Get the absolute best out of your equipment and hear your music exactly as it was meant to be heard. This kit will enable you to set your vertical tracking force (VTF), headshell alignment and vertical tracking angle (VTA) so that you records can sing like never before. Correct set up is vital to optimum audio playback, and we’re here to help you get the best of your setup.

Includes a May Records Deluxe Mirrored Alignment Protractor, Elvon Azimuth, Ultra High-Sensitivity Tonearm Force Gauge Scales (including battery) and a 6mm micro bubble spirit level. Everything you need to get your machine correctly set up and souding as good as it can.

DELUXE Setup Tool Kit Contents:

• 6mm Turntable Spirit Level
• Deluxe Mirrored Turntable Calibration Alignment Protractor
• Elvon Tonearm Azimuth Ruler
• Deluxe High-Sensitivity Stylus Force Gauge Scales

PROTRACTOR INSTRUCTIONS:

1. Place the protractor on your turntable platter with the hole over the spindle.

2. Move cartridge/ tonearm until stylus rests exactly on centre of bulls eye. (120.9mm radius). Check that cartridge is square with outer set of gridlines. – If not, loosen cartridge mounting screws and twist cartridge lightly until it is square.

3. Move cartridge/ tonearm until stylus rests exactly on centre of inner bulls-eye (66.04mm radius), Rotate protractor around spindle as required. Check that cartridge is square with inner set of grid lines. – If not, change overhang, (move cartridge in or out along the axis) until cartridge is square.

4. Repeat step 2 and 3 till cartridge is square at both points. Tighten mounting, and recheck as above. Remove Protractor. Relax and enjoy!