Record Player Setup Tool Kit – Vinyl Lovers Gift Pack

Description

Get the absolute best out of your equipment and hear your music exactly as it was meant to be heard with this Record Player Setup Tool Kit. These tools will enable you to set your vertical tracking force (VTF), headshell alignment and vertical tracking angle (VTA) so that you records sing like never before.

The Record Player Setup Tool Kit includes a May Records Alignment Protractor, Azimuth, Vision Tonearm Force Gauge Scales (including batteries) and a 6mm spirit level.

Contents:

• Turntable Spirit Level 12x6mm
• Turntable Calibration Alignment Protractor
• Tonearm Azimuth Ruler
• Stylus Force Gauge Scales

PROTRACTOR INSTRUCTIONS:

1. Place the protractor on your turntable platter with the hole over the spindle.

2. Then move the cartridge/tonearm until the stylus rests exactly on the centre of bulls eye. (120.9mm radius). Check that the cartridge is square with the outer set of gridlines. – If not, loosen cartridge mounting screws and twist the cartridge lightly until it is square.

3. Move the cartridge/tonearm again until the stylus rests exactly on the centre of the inner bulls-eye (66.04mm radius), Rotate the protractor around the spindle as required. Check that the cartridge is square with the inner set of grid lines. – If not, adjust the overhang, (move cartridge in or out along the axis) until the cartridge is square.

4. Repeat step 2 and 3 until the cartridge is square at both points. Tighten the mounting, and recheck as above.

5. Remove Protractor. Relax and enjoy!