Record Player Setup and Cleaning Tool Kit: Vinyl Lovers Gift Bundle

Description

Setup and Cleaning Tool Kit. The perfect pack to set up and care for your turntable. Includes two carbon fibre cleaning brushes (one for the stylus, one for your records), an Alignment Protractor and Azimuth Ruler, Tonearm Force Gauge Scales and a 6mm spirit level.

Setup and Cleaning Tool Kit Contents:

• Carbon Fibre Turntable Brush
• Needle Cleaner Brush
• Turntable Spirit Level 12x6mm
• Turntable Calibration Alignment Protractor
• Tonearm Azimuth Ruler
• Stylus Force Gauge Scales

PROTRACTOR INSTRUCTIONS:

1. Place the protractor on your turntable platter with the hole over the spindle.

2. Move cartridge/ tonearm until stylus rests exactly on centre of bulls eye. (120.9mm radius). Check that cartridge is square with outer set of gridlines. – If not, loosen cartridge mounting screws and twist cartridge lightly until it is square.

3. Move cartridge/ tonearm until stylus rests exactly on centre of inner bulls-eye (66.04mm radius), Rotate protractor around spindle as required. Check that cartridge is square with inner set of grid lines. – If not, change overhang, (move cartridge in or out along the axis) until cartridge is square.

4. Repeat step 2 and 3 till cartridge is square at both points. Tighten mounting, and recheck as above. Remove Protractor. Relax and enjoy!